Anvil Interior Claim PC_i2-Anv57[Matin Sanguine]

Post progress on your claimed work
Post Reply
User avatar
Kaiel
PT Modder
Posts: 68
Joined: Thu May 10, 2018 3:03 am

Anvil Interior Claim PC_i2-Anv57[Matin Sanguine]

Post by Kaiel » Wed May 30, 2018 11:51 am

Seaside Flophouse North
Building 57 on this map:
Image

Please use the T_Imp_SetGC_I - Set

Notes:
57. Seaside Flophouse North
a. Perella(Bosmer, f, agent):At first glance, a common pauper. Perella is in fact a secret Blades agent, posted to keep an eye on the criminal element in the port(specifically, the redguard smugglers). Paranoid about another Blades agent somewhere in town(Nontus Jorrel, in the Praetorium), Perella has hired a private investigator to seek them out(Habashi, in the Sailor's Fluke Tavern).
b. Rok'dun(Redguard, m, sailor):Tenant.
c. Khafiz(Redguard, m, sailor):Tenant.
d. Galtus Melussa(Colovian, m, sailor):Tenant.
e. Lassinia Maro(Imperial, f, pauper):Tenant.
f.There are more inhabitants, but they are out working around Anvil. Be sure to include living space for 7-10 total inhabitants.
The exterior file can be found in this thread.
Always use the latest file.

User avatar
Matin Sanguine
PT Modder
Posts: 11
Joined: Wed Feb 18, 2015 1:19 pm

Re: Anvil Interior Claim PC_i2-Anv57[Unclaimed]

Post by Matin Sanguine » Wed Jun 20, 2018 5:45 am

May I claim this interior?

It's a vaguely* 2x5, three story high interior using the aforementioned tileset, with a smattering of 1x1 rooms for the various tenants scattered about (I can reasonably add about seven rooms of this size in the interior, with maybe another two being possible depending on how the tower section comes out). Objects will primarily be com_p.

*vague on account of the tower section, which is going to be bit larger then just a 2x2 block..
"SLOAD. SOAP. IS. NOT. SOAP"- TF

"As to where the ash comes from.. f**k if I care." -Sload

"At TR, we LOVE our quests to be steeped in lore, so you'd be able to flex your CHIM there just fine." - Nanu

User avatar
worsas
Project Administrator
Posts: 2074
Joined: Wed Dec 31, 2014 1:23 am

Re: Anvil Interior Claim PC_i2-Anv57[Unclaimed]

Post by worsas » Wed Jun 20, 2018 12:13 pm

Sounds good. The horizontal dimensions for a single house shell usually vary between 2x5 and 3x5.

User avatar
Kaiel
PT Modder
Posts: 68
Joined: Thu May 10, 2018 3:03 am

Re: Anvil Interior Claim PC_i2-Anv57[Matin Sanguine]

Post by Kaiel » Wed Jun 20, 2018 12:54 pm

This building should be 3x5 on the main part, and then a 3*3 square on the circle but with angled walls to make it into an octagonal room. I suggest matching the center interior floor piece with the corresponding piece of the main room where the door between the two will be and then letting the outside be cut off weirdly, it will save you lots of trouble with the door frame later. Are you on the discord?

User avatar
Matin Sanguine
PT Modder
Posts: 11
Joined: Wed Feb 18, 2015 1:19 pm

Re: Anvil Interior Claim PC_i2-Anv57[Matin Sanguine]

Post by Matin Sanguine » Fri Jun 22, 2018 12:04 pm

worsas wrote:
Wed Jun 20, 2018 12:13 pm
Sounds good. The horizontal dimensions for a single house shell usually vary between 2x5 and 3x5.
Thanks for clarifying.
Kaiel wrote:
Wed Jun 20, 2018 12:54 pm
This building should be 3x5 on the main part, and then a 3*3 square on the circle but with angled walls to make it into an octagonal room. I suggest matching the center interior floor piece with the corresponding piece of the main room where the door between the two will be and then letting the outside be cut off weirdly, it will save you lots of trouble with the door frame later. Are you on the discord?
Firstly; sorry for taking a bit to get back to you; I only just checked the thread.

I think I might have accidently caused some confusion; when I said that the tower section would be a 'bit larger than just a 2x2 block', I just wanted to give a rough idea of what the size would likely be, minus the walled off sections that wouldn't be part of the interior proper - I was always going to use a 3x3 block, and then employ walls angled such as to make the section resemble the shape of the tower. I probably should have just said that it was 3x3 in size outright and mentioned how parts would be cut off due to the angled walls, as it's a bit clearer with respect to my intent.

So to restate things; the main section is 2x5, and the tower section is comprised of a 3x3 block, minus the space cut off by the angled walls.

As for the size of the main section; I'm going to keep the width the same, but that can change if I see there's a need for it.

Thanks for your suggestion regarding the doorframe, but I've already handled joining the two sections up.

Yeah, I'm on discord, though I don't think I have a 'PT modder' tag, so that's why you probably missed me (I'll shoot you a message so you can find me.

Update Overview

Basic shell and layout of the interior is complete, the cell's name is 'PC_i2-Anv57'; I'll get started on detailing for the next update.

I know I said I was going to put seven rooms in the main section, but I had to revise the layout due to being unable to put one of the windows in the earlier layout (I intially did a basic layout of the whole interior just so I could get a clear idea of how I was tackling it prior to claiming), so now there's only six; to make up for this, I've decided to place two rooms in both the 3rd and 2nd floor of the tower section, though I'll have to wait until I start detailing it to see if it's wholly workable (it's a bit of a squeeze).
Attachments
PC_i2-Anv57_Matin Sanguine_1.ESP
(11.83 KiB) Downloaded 5 times
"SLOAD. SOAP. IS. NOT. SOAP"- TF

"As to where the ash comes from.. f**k if I care." -Sload

"At TR, we LOVE our quests to be steeped in lore, so you'd be able to flex your CHIM there just fine." - Nanu

Post Reply

Return to “Claimed”

Who is online

Users browsing this forum: No registered users and 1 guest