Anvil Interior Claim PC_i2-Anv29[Reviewing][Torlof]

[worsas]

Home and shop of a clothier. Middle class.

Building 29 on this map:


Please use the T_Imp_SetGC_I - Set.

The exterior file can be gotten from this thread. Always use the latest file.

[Torlof]

Would like to claim this.
Made basic layout already, but dunno what to do with part of the roof between main building and additional one.

[worsas]

A much belated grantage!

[Torlof]

Somewhat completed first floor with store and backroom/lounge room.
Had to rearrange rooms (and all the objects that i placed there beforehand), that's why it took me so long to present something substantial.
I slightly moved fireplace, gonna post screenshots with exterior and interior after i complete this claim.

[Torlof]

Finished it in terms of clutter, i think. Also, changed some things on the first floor.
Didn't have any information about who lives there, so i assumed it's female clothier.
Where i moved fireplace:

[Torlof]

Some fixes and stuff. It's ready for review, i think.
Possible problems with this interior:
1)part of the roof between main building and extension; i used two corner roof tiles in that place and hid bleeding parts with help of corridor underneath and ceiling;

2)this part of exterior wall

Since there is no half-wall, like in Rga tileset, i just used a couple of pillars.
Dunno if the result is satisfactory.

[Leon]

Off to review.

[Fürst Thal]

Reviewing!

[Fürst Thal]

Not reviewing as Torlof said he wants to revisit it later.

[Scamp]

Back to claimed then?

[Torlof]

Added pathgrid, changed store area a bit and checked if i implemented the roof correctly.

[Fürst Thal]

Reviewing again!

[Fürst Thal]

Ok this has some problems that will have to be addresed by the claimant. I am going to first post the review up until now though.

Clean: No.
Lightning: Good.
Fits Exterior: Yes.
Illegal To Sleep: Yes.
Northmarker: Set but wrong.
Pathgrid: Good though a bit excessive.

1.Floor:

Floaters:

T_Imp_SetAnv_Door_i01: Floated a bit so I increased its size.
misc_clothbolt_03: Floated.
T_Imp_ColClayCup_01: Floated.

Bleeders:

misc_clothbolt_02: Bleeded a bit too much.
furn_com_rm_bookshelf_02: Bleeded and floated a bit.
furn_log_03: Bleeded a bit at one end.

Others:

furn_com_r_bookshelf_01: Replaced with "T_Imp_FurnR_Bookshelf_04" which is made for situations like this.
Changed to bars to the ones meant to be used there.
T_Com_Iron_Dagger_01: I brought him up a bit because it doesn't like a dagger can go that far in.
T_Imp_SetGC_I_Pillar_01: Replaced with "T_Imp_SetGC_I_Pillar_02" to make it symetrically to the one on the other side.
Added missing "T_Imp_SetGC_I_Skirting_01".

2.Floor:

Floaters:

T_Imp_SetGC_DoorIn_02(Three): Floated a bit so I increased its size. Also changed its position a bit to make it better fit the doorway.
T_Imp_Furn_RugBigCm_12: Floated.
furn_com_rm_bookshelf_02: Floated a bit.
T_Imp_Furn_DressPattern_02: Floated strongly.
T_CyrCom_Var_Bl1FoodGC: Floated.

Bleeders:

None: Good.

Others:

misc_uni_pillow_01: Sunk a bit more.
text_paper_roll_01(Three): Rotated a bit to make it rest with one end on the surface.
misc_spool_01: Improved its rotation.


Now to the problems:

Randomly scaled misc items: Should not be done randomly as is the case here. Especially bottles of wine that are probably mass produced should'nt have random differences in scale.

1.Floor Door: Is off grid and produces some problems like not being able to skirt correctly some parts of the walls. This needs to be redone which will require a more generall redo of the 1.Floor.

2.Floor: Just use normal hallway pieces in this case and not the roof tiles. That should solve the whole mess.